Packaging Machinery Manufacturer

Industrial Packaging Machinery ManufacturerCustom Automated Packaging Equipment & Solutions

50+ intelligent machine models · Customers in 100+ countries · 20,000 ㎡ factory in Zhongshan, Guangdong

Choosing an industrial packaging machinery manufacturer is a capital decision that fixes your line’s output, changeover time and compliance posture for the next 10–15 years. This page is written for plant engineers, procurement managers, OEM project leads and equipment distributors evaluating multi-lane stick pack, sachet, pouch, liquid filling and turnkey end-of-line systems for food, pharmaceutical, nutraceutical, cosmetic, chemical, pet food and nicotine pouch production. You will find the specifications to define, the certifications to request, realistic lead-time and MOQ expectations, and how a factory-direct quotation and free product trial work.

Key takeaways

  • Ludyway builds 50+ packaging machine models for granule, powder, liquid and pouch formats in a 20,000 ㎡ facility equipped with 200+ manufacturing units and staffed by 130+ packaging specialists.
  • Multi-lane stick pack and sachet machines are typically configured from 2 to 12 lanes; a 10-lane stick pack system can exceed 600 packs per minute depending on fill weight, film and seal type.
  • MOQ is 1 machine. Standard models usually ship 30–60 days after deposit; custom turnkey lines typically require 90–150 days from drawing approval to factory acceptance test (FAT).
  • Request CE marking, ISO 9001 documentation, FDA-compliant food-contact materials (304/316L stainless steel) and a recorded FAT with your own product before shipment.
  • Founded in 1993, the company serves customers in 100+ countries and is targeting export revenue above RMB 1 billion (about US$138 million) in 2026.

Multi-Lane Stick Pack, Sachet & Turnkey Line Equipment

Representative configurations across the industries we serve. Every unit is engineered to your product, film and output target; quotations are issued per project.

Instant coffee stick pack and sachet packaging line by Ludyway

Instant Coffee Packaging Line

Food & Beverage, Stick Pack & Sachet

Quotation on request →

Multi-lane granule packaging machine for pet food sachets and stick packs

Pet Food Granule Machine

Pet Food, Multi-Lane Stick Pack

Quotation on request →

Multi-lane shampoo sachet filling and sealing machine

Shampoo Sachet Filler

Personal Care, Liquid Sachet

Quotation on request →

High-speed multi-lane granule packaging machine for the chemical industry

Chemical Granule Packager

Chemical, High-Speed Multi-Lane

Quotation on request →

Automated spice and seasoning packaging line for granules and powder

Spice Seasoning Line

Food, Granule & Powder Line

Quotation on request →

Automated diagnostic kit pouch filling and sealing packaging line

Diagnostic Kit Pouch Line

Medical, Pouch Filling & Sealing

Quotation on request →

Automated antifreeze fluid filling and sealing packaging line

Antifreeze Liquid Line

Automotive Chemical, Liquid Filling

Quotation on request →

High-efficiency feed premix packaging machine for granules and powders

Feed Premix Packager

Animal Nutrition, Granule & Powder

Quotation on request →

View the complete equipment and turnkey line range →

What to Expect from an Industrial Packaging Machinery Manufacturer

An industrial packaging machinery manufacturer does more than weld frames and wire a PLC. The manufacturer is accountable for matching dosing technology to your product’s bulk density, flowability and hygroscopicity, for seal integrity across the film structures you actually buy, and for integrating upstream feeding with downstream checkweighing, cartoning and palletizing so the whole line holds a stable OEE rather than a brochure speed.

Industry research from PMMI’s State of the Industry program consistently identifies flexible-pack growth, labor-driven automation and SKU proliferation as the main drivers of packaging machinery investment. Those pressures explain why buyers now specify multi-lane, quick-changeover and fully integrated systems instead of standalone fillers, and why the supplier’s engineering depth matters as much as its price list.

130+

Professional packaging experts

20,000 ㎡

Modern production facility

30+

Years of industry experience since 1993

200+

Manufacturing equipment units in-house

Packaging Equipment by Product Form

The first engineering question is not “which machine” but “which dosing principle”. Granules, powders, liquids and pre-formed items each call for a different filler, and the filler determines accuracy, speed ceiling and cleaning regime. The table below summarises how we map product forms to equipment.

Product form Dosing technology Pack formats Typical applications Key options
Granules Volumetric cup, multi-head weigher, vibratory + counting Stick pack, 3/4-side-seal sachet, pillow bag, premade pouch Sugar, coffee, seeds, nuts, kibble, fertilizer, nicotine pouches Nitrogen flushing, easy-tear notch, counting into cartons
Powders Servo auger filler with agitator, load-cell feedback Stick pack, sachet, 10–50 kg bag, drum Protein, collagen, electrolytes, spices, pharma granulates, detergent Dust extraction, heated jaws for hygroscopic powder, CIP-ready hopper
Liquids & pastes Piston, peristaltic or gear pump; hot-fill up to 85 °C Liquid stick, sachet, spouted pouch, bottle, tube Sauces, honey, oils, serums, shampoo, oral liquids, lubricants Anti-drip nozzles, jacketed tank, 316L wetted parts
Pre-formed items Pick-and-place, multi-lane feeding, flow wrap Single wipe sachet, mask pouch, blister, flow-wrapped bar Wet wipes, face masks, tablets, capsules, diagnostic kits, fasteners Sterile-barrier sealing, vision inspection, serialization printing

Core Machine Categories We Engineer

Automatic multi-lane sachet packaging machine for freeze-dried strawberry granules

Multi-lane sachet machine configured for freeze-dried fruit granules.

Multi-Lane Stick Pack & Sachet Machines

A multi-lane vertical form-fill-seal machine unwinds one wide film roll, slits it into lanes and forms stick packs or 3/4-side-seal sachets in parallel, multiplying output without multiplying floor space. Servo film pull, PID-controlled sealing jaws and lane-by-lane dosers give consistent fill weight and seal strength across every lane.

Our multi-lane stick pack and sachet packaging machine platform is built from 2 to 12 lanes with auger, volumetric cup or piston dosing, and accepts laminate, paper-based and mono-material films. Typical stick widths run 17–40 mm; sachets run 40–150 mm wide.

Standard options include nitrogen flushing for oxygen-sensitive powders, tear notches, inkjet date coding, automatic counting and chain-pack delivery to a cartoner.

Liquid Filling, Pouch & Wipe Packaging Systems

Liquids, gels and creams need a filler that matches viscosity and particulate size: piston pumps for sauces and honey, peristaltic heads for low-viscosity pharma liquids, gear pumps for oils and lubricants. Our multi-lane liquid packaging machines use 316L wetted parts, jacketed tanks for hot-fill and anti-drip nozzles so seals stay free of product.

For pre-formed items we supply premade pouch fillers, horizontal flow wrappers and single-sachet wet-wipe machines that fold, saturate and seal non-woven in one pass. Bottle filling and capping monoblocks cover shampoo, body wash, syrups and mouthwash.

Every liquid system is specified with clean-in-place paths, tool-less nozzle changeover and recipe memory on the HMI so operators can switch SKUs in minutes.

Automatic wet wipe sachet and pouch packaging machine for industrial production

Automatic wet-wipe sachet machine with integrated folding and liquid dosing.

Turnkey Lines & End-of-Line Automation

A turnkey packaging line connects bulk feeding, dosing, forming-filling-sealing, inspection and secondary packaging under one control architecture. The standard sequence is vacuum or screw feeder → doser → multi-lane FFS → checkweigher and metal detector → counting and cartoning → case packing → palletizing, with reject stations after each inspection point. Our custom turnkey packaging lines are delivered with a single layout drawing, electrical schematic set and line-level HMI.

End-of-line equipment, including carton erectors, case sealers, strapping, stretch wrapping and automated palletizing systems, is sized to the primary machine’s peak rate plus a 15–20 % buffer so the filler is never starved or blocked.

Customizable high-speed palletizing packaging line for nicotine pouch cartons

End-of-line palletizing cell integrated with a multi-lane nicotine pouch packaging line.

Specification Checklist Before You Request a Quote

A precise quotation depends on precise inputs. Send the data below with your RFQ and the engineering proposal can be issued in days rather than weeks.

Product & dosing data

  • Product form, bulk density (g/ml), particle size and flowability; note if hygroscopic, dusty, abrasive or sticky
  • Target fill weight or volume per pack and acceptable tolerance (e.g. ±1 % for auger-dosed powder, ±0.5 % for piston-dosed liquid)
  • Pack format and dimensions, film structure and thickness, seal type (3-side, 4-side, back seal)
  • Required output in packs per minute or kg per hour, and number of SKUs with changeover frequency
  • Any oxygen, moisture or light barrier requirement (nitrogen flush, desiccant insertion)

Machine & utility requirements

  • Contact-material grade: SUS304 for food, SUS316L for pharma, acids and corrosive chemicals
  • Washdown rating (IP54 standard, IP65 for washdown areas) and hygienic design level (open-frame, sloped surfaces)
  • Power supply (380 V/50 Hz, 480 V/60 Hz, 220 V/60 Hz), compressed air at 0.6–0.8 MPa and available footprint
  • Preferred PLC, servo and HMI brands, data interface (OPC UA, MES connection) and audit-trail needs
  • Upstream and downstream interfaces: feeder type, cartoner, checkweigher, labeling and coding

Typical performance envelope for multi-lane machines

Parameter Stick pack 4-side-seal sachet Notes
Lanes 2–12 2–10 Lane count limited by film width and pack width
Fill range 0.5–50 g / ml 1–100 g / ml Doser changed for ranges outside this window
Cycle speed Up to 60–80 strokes/min per lane Up to 50–70 strokes/min per lane Real rate depends on fill weight, film and seal dwell
Pack size W 17–40 mm × L 50–200 mm W 40–150 mm × L 50–200 mm Custom formers for non-standard shapes
Accuracy ±1–2 % powder, ±0.5–1 % liquid ±1–2 % powder, ±0.5–1 % liquid Verified during FAT with your product

Certifications, Standards & Compliance

Compliance is market-specific, so define your destination before the machine is built. The documents below are the ones procurement and QA teams most frequently require from an industrial packaging machinery manufacturer.

Machine safety & quality

CE marking with Declaration of Conformity (Machinery Directive, EMC, LVD), ISO 9001 quality system documentation, interlocked guarding, emergency-stop circuits and electrical schematics in English. For North America, specify UL/CSA-listed components and NEMA-rated panels at the RFQ stage.

Food & pharma contact

Product-contact parts in SUS304/316L with material certificates, food-grade seals and lubricants, and film-contact surfaces aligned with FDA food-contact substance requirements or EU framework regulation. Pharma lines add cGMP-oriented design, IQ/OQ support documents and 21 CFR Part 11-ready audit trails.

Medical & sustainability

Sterile-barrier pouch lines are validated against ISO 11607 seal-strength and integrity requirements. For the EU, the Packaging and Packaging Waste Regulation is pushing recyclable mono-material films; confirm your machine’s sealing system is proven on PE- and paper-based structures.

A certificate on paper is worth less than a recorded factory acceptance test. Ask for FAT videos running your product, your film and your target speed for at least 30 continuous minutes, with fill-weight samples logged lane by lane.

Custom Solutions by Industry

Each sector brings its own hygiene level, film, speed and regulatory expectations. The configurations below reflect how our engineering team typically adapts the same core platforms.

Food & Beverage

Coffee, sugar, spices, seasoning, drink mixes, sauces and honey in stick packs and sachets; open-frame hygienic design, nitrogen flushing and chain-pack counting for retail cartons.

Pharmaceutical & Nutraceutical

Protein, collagen, electrolyte, probiotic and ORS powders, oral liquids, tablets and capsules; 316L contact parts, dust-tight enclosures, IQ/OQ documents and serialization-ready coding.

Cosmetics & Personal Care

Serums, creams, shampoo, sunscreen, masks and wipes in sample sachets, sticks, tubes and bottles; multi-lane liquid dosing with precise cut-off for low-volume 1–5 ml samples.

Chemical & Agro

Detergents, water-treatment chemicals, lubricants, fertilizers, pesticides and seeds; corrosion-resistant wetted parts, explosion-protected options and 10–50 kg bag or drum lines.

Pet Food & Animal Feed

Kibble, treats, freeze-dried meat, supplements, premix and aquatic feed; multi-head weighers for fragile pieces, vacuum packaging for freeze-dried products and bulk bagging lines.

Nicotine & Oral Pouches

Tobacco-free nicotine, snus and herbal pouches with can filling, counting and cartoning; our turnkey nicotine pouch packaging lines integrate pouch forming through palletizing.

How Procurement Works: From RFQ to Site Acceptance

Factory-direct purchasing follows a defined path. Knowing the stages in advance helps you align internal approvals, site preparation and payment milestones.

01

Share product & target format

Send the specification checklist and, where possible, 2–5 kg of product for a free dosing and sealing trial.

02

Engineering proposal

Lane count, doser type, speed curve, layout drawing and utility list, usually within 3–7 working days.

03

Formal quotation

Itemised quote under EXW, FOB, CIF or DAP terms with lead time, warranty, spare-parts kit and training scope.

04

Order & manufacturing

Deposit by T/T or L/C, drawing approval, weekly progress photos and component traceability.

05

FAT with your product

On-site or live-video acceptance test against the agreed protocol before balance payment and shipment.

06

Installation & SAT

Commissioning engineers, operator and maintenance training, SAT sign-off and remote support thereafter.

MOQ, lead time and quotation terms

  • Minimum order: 1 machine; distributors and contract packers can negotiate framework agreements for multiple units per year.
  • Lead time: standard multi-lane and sachet models typically 30–60 days after deposit; integrated turnkey lines 90–150 days depending on cartoning and palletizing scope.
  • Quotation basis: written RFQ with product data; prices are project-specific and are never published on product pages.
  • Deliverables: machine, format parts for agreed SKUs, standard spare-parts kit, manuals and electrical drawings in English, FAT report.
  • After-sales: warranty period stated in the quotation, remote diagnostics via HMI, overseas commissioning and spare parts shipped from Zhongshan, Guangdong.

About Ludyway Machinery

Granule weighing and packaging system for food industry production lines manufactured by Ludyway

Granule weighing and packaging system built for a food production line.

Ludyway is one of the largest packaging machine manufacturers in China, specializing in advanced packaging equipment and turnkey production solutions for the food, pharmaceutical and health industries. Founded in 1993 and based in Nanlang Town, Zhongshan, Guangdong, the company operates a 20,000 ㎡ manufacturing facility with 200+ equipment units and a 130+ strong engineering and packaging team, and offers more than 50 intelligent machine models covering multi-lane stick pack, sachet, liquid and fully automated packaging systems for granule, powder, liquid and pouch applications.

Growth has been steady: annual revenue passed RMB 100 million in 2010, RMB 200 million in 2015, RMB 300 million in 2020 and RMB 500 million in 2025, with export revenue planned to exceed RMB 1 billion (about US$138 million) in 2026. Customers in more than 100 countries and regions rely on the company for equipment, customised production lines and long-term technical support.

Buyers are welcome to visit the factory to see machines running on live product, or to meet the team at international packaging exhibitions, including PACK EXPO, where current multi-lane and turnkey systems are demonstrated.

Frequently Asked Questions

What is the minimum order quantity for packaging machinery?

One machine. Standalone stick pack, sachet, liquid filling or end-of-line units can be ordered individually, and distributors or contract packers can agree annual volume terms for better pricing and shared spare-parts stock.

How long does delivery take?

Standard multi-lane and sachet models typically ship 30–60 days after deposit and drawing approval. Turnkey lines with cartoning, case packing and palletizing usually take 90–150 days to FAT, plus sea freight of 25–45 days to most ports.

Can you test my product before I place an order?

Yes. Send 2–5 kg of product and sample film; our engineers run dosing accuracy, seal strength and speed trials on a comparable machine and return a video, filled samples and a written test report before the quotation is finalised.

Which certifications and documents are supplied?

CE Declaration of Conformity, ISO 9001 system documentation, stainless-steel material certificates, electrical schematics, operation and maintenance manuals in English, and a FAT report. cGMP-oriented IQ/OQ documentation and UL/CSA component lists are available on request for pharma and North American projects.

Do you supply complete lines or only standalone machines?

Both. Projects range from a single 4-lane stick pack machine to fully integrated lines covering feeding, dosing, forming-filling-sealing, checkweighing, metal detection, cartoning, case packing and robotic palletizing under one HMI, with one layout drawing and one point of responsibility.

Next Step for Buyers & Engineers

Request a Quotation, Book a Free Product Trial or Get the Full Machine Catalogue

Send your product data, target pack format and required output. You will receive an engineering proposal with layout, lane configuration and lead time, followed by an itemised quotation under your preferred Incoterms.

Factory visits welcome at Nanlang Town, Zhongshan, Guangdong, China · Catalogue and reference list available on request

Contact Us Now

Our specialists will get back to you within 10 minutes.